Hanna instruments
Since 1978, Hanna Instruments has grown to be a worldwide leader in the development of electro-analytical instrumentation. The development of novel instrumentation for customers that would not have normally used instrumentation is what has led to the success of the company.
From pH meters, conductivity meters, turbidity meters, photometers to testers, titrators Karl Fischer, etc.
HANNA Instruments is one of the references in controlling water quality, thanks to its great evolution in the quality of its products and electrodes: Automatic detection electrode which reports on the sensor type, calibration and serial number. Data download both pen drive as a mini computer via USB port.
HANNA Instruments products:
K-Type Waterproof Thermocouple Thermometer
HI 935005N is a waterproof, K-type thermometer offering accurate temperature measurements in a wide range as well as a 1600 hours of battery life. This unit displays current temperature along with the minimum and maximum values achieved during the measuring session on the LCD. The HOLD button freezes the display to allow the user time to record readings. The °C/°F button switches between the Celsius and Fahrenheit temperature scale. The CLEAR button restarts the evaluation of high and low values. HI 935005N features a user-activated backlight for low or no light conditions. A CAL button to allow the operator a simple one point calibration in an ice bath at 0°C when probe interchange occurs. The instrument is equipped with BEPS (Battery Error Prevention System) which alerts the user in the event that low battery power could adversely affect readings. A wide variety of interchangeable probes are available to meet your specific needs. Optional rubber boots are available.
HI 9125N, Portable pH/mV Meter with Enhanced Design
The HI 9125N heavy-duty waterproof pH/mV meter has been designed with the latest microprocessor technology to provide laboratory results and accuracy under harsh industrial conditions.
HI-2221 phmeter with Calibration Check
The HI 2221 is a benchtop pH/ORP and Temperature meter that measures pH -2.00 to 16.00 range and mV in ±699.9; ± 2000 range. The accuracy is ±0.01 pH and the temperature is ±0.2 °C. The meter has a logging capability of up to 100 points.
HI 9033 / 9034 , Waterproof, Multi-range EC and TDS Meters with ATC
The HI 9033 is a rugged meter designed to hold up under extended use in wet, humid, dusty and muddy conditions. It utilizes a single probe, and performs conductivity readings in all four ranges. It can measure samples from deionized water to brine without having to switch or recalibrate the probe!
Fotómetro de Cloro Libre HI-96701
El HI 96701 es un medidor microprocesador de auto-diagnóstico portátil que se beneficia de los años de experiencia de Hanna en la fabricación de instrumentos analíticos. Tiene el avanzado sistema óptico basado en una lámpara de tungsteno especial y un filtro de interferencias de banda estrecha que permite lecturas de la máxima exactitud y repetibilidad. Todos los instrumentos van calibrados de fábrica y su diseño óptico y electrónico minimiza la necesidad de calibrarlos frecuentemente.
Checktemp, Thermoteter with penetration Probe
If you ever wished that your temperature measurements could be made a little easier, the Checktemp® might just be what youre looking for! The Checktemp® offers high accuracy over a wider range without worrying about breakage or condensation. The Checktemp® offers NO breakage, NO waste, NO injuries, NO difficulty in reading; not even a parallax error by taking a wrong measurement due to the angle of view! Checktemp® is provided with HANNAs unique CAL CHECK function for accurate measurements every time: simply activate a switch and the instrument will simulate an ice bath of 0.0°C (32.0°F) signal that is displayed on the LCD within a range of ±0.3°C (±0.5°F). The sharp-tip probe of the Checktemp® easily penetrates semisolid products, making routine controls simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements. Models with factory calibration certificate against NIST standards are also available.
Digital ºBrix HI-96801 Refractometer
The HI 96801 Sucrose digital refractometer is rugged, portable and water resistant for measurements in the lab or field. This instrument offers a specific analysis to determine accurate sugar concentration. This optical instrument employs the measurement of the refractive index to determine parameters pertinent for sugar concentration analysis. The actual measurement of refractive index is simple and quick and provides the operator a standard accepted method for sugar content analysis. Samples are measured after a simple user calibration with deionized or distilled water. Within seconds this instrument measures the refractive index of the sample and converts it to %Brix. This digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for measurements in the field. The HI 96801 utilizes internationally recognized references for unit conversion and temperature compensation and employ methodology recommended in the ICUMSA Methods Book (internationally recognized body for sugar analysis). Temperature (in °C or °F) is displayed simultaneously with the measurement on the large dual level display along with icons for low power and other helpful messages.
Electrodo de Procesos para usos generales en aguas HI 2114P
HANNA Instruments presenta su electrodo básico para usos generales en aguas en procesos. Electrodo de pH para usos generales con cuerpo de PEI, Conexion BNC. Sistema de referencia Ag/AgCl y electrolito en gel.
Electrodo de Procesos para usos generales HI 1090T
HANNA Instruments presenta su electrodo HI1090T para usos generales en aguas en procesos, con conexión S7 compatible con otras marcas.
Electrodo amplificado de pH de usos generales HI 6100405
El electrodo amplificado para usos generales HI6100405, con matching pin y punta plana.
Electrodo de pH para soluciones ácidas y alcalina HI 1043B
El electrodo HI 1043 está diseñado para trabajar en muestras ácidas y alcalinas. Este electrodo dispone de distintos tipos de conectores, para poder utilizar con cualquer pHmetro del mercado. Aconsejado para el sector de pinturas.